Starts in:

2 DAYS

4 HRS

50 MIN

26 SEC

Starts in:

2 D

4 H

50 M

26 S

Closed

Tenant-Id and Tenant-Name Not Set in Header After Dashboard Redirect (SSO OIDC) #8267

Repunjay_TASC created 10 days ago

Tenant-Id and Tenant-Name Not Set in Header After Dashboard Redirect (SSO OIDC) #8132

https://abp.io/support/questions/8132/Tenant-Id-and-Tenant-Name-Not-Set-in-Header-After-Dashboard-Redirect-SSO-OIDC?CurrentPage=5

74 Answer(s)

maliming created 9 days ago

Support Team Fullstack Developer

I'm off work(UTC+8) : (

Can you try recording the har again?

Why do you have two har files?

localhost:4200 -> login -> redirect - https://localhost:44333/Account/Login -> OpenIdConnect -> auth0.com(redirect url is https://localhost:44333/api/oidc/ExternalLoginCallback)

signing at auth0 -> https://localhost:44333/api/oidc/ExternalLoginCallback -> http://localhost:4200/?code=UAbYI -> success

0
Repunjay_TASC created 9 days ago
hi

I'm off work(UTC+8) : (

Ok np we will connect tomorrow.

Can you try recording the har again?

I'm trying to record my screen, but once I open the network tab, it doesn't appear in the recording. Let me try one more time sharing it with you shortly.

Why do you have two har files?

After redirected anchor-admin-dashboard above request remove from network that's why share two hra file.

localhost:4200 -> login -> redirect - https://localhost:44333/Account/Login -> OpenIdConnect -> auth0.com(redirect url is https://localhost:44333/api/oidc/ExternalLoginCallback) signing at auth0 -> https://localhost:44333/api/oidc/ExternalLoginCallback -> http://localhost:4200/?code=UAbYI -> success

maliming created 9 days ago

Support Team Fullstack Developer

You can select the preserve logs

They will use a one browser tab throughout the whole process.

localhost:4200 -> 
login -> 
redirect - https://localhost:44333/Account/Login -> 
OpenIdConnect -> 
auth0.com(redirect url is https://localhost:44333/api/oidc/ExternalLoginCallback) -> 
signing at auth0 -> 
https://localhost:44333/api/oidc/ExternalLoginCallback -> 
http://localhost:4200/?code=UAbYI -> 
angular success

0

Repunjay_TASC created 9 days ago

ok let me try
0

maliming created 9 days ago
Support Team Fullstack Developer

and you can try to publish your angular&authserver website to internet. So I can check it online.
0

Repunjay_TASC created 9 days ago

and you can try to publish your angular&authserver website to internet. So I can check it online.

I have shared HRA and DEV URL over email please check.
0

Repunjay_TASC created 8 days ago

Hi

Any update ?

maliming created 8 days ago

Support Team Fullstack Developer

hi I have checked the latest har file

Can you try to set redirect_uri as http://localhost:4200 at First auth2 login request?

Your angular doesn't start the oauth2 login process.

If you can share a project that reproduces your problem, this would be the fastest way to troubleshoot the problem.

The POC angular project

localhost:4200 -> 
login -> 
redirect - https://localhost:44333/Account/Login ((redirect url is http://localhost:4200)) -> 
OpenIdConnect -> 
auth0.com(redirect url is https://localhost:44333/api/oidc/ExternalLoginCallback) -> 
signing at auth0 -> 
https://localhost:44333/api/oidc/ExternalLoginCallback -> 
http://localhost:4200/?code=UAbYI -> 
angular success

Your angular project

localhost:4200 -> 
login -> 
redirect - https://localhost:44333/Account/Login (https://localhost:44333/api/oidc/ExternalLoginCallback) -> 
OpenIdConnect -> 
auth0.com(redirect url is https://localhost:44333/api/oidc/ExternalLoginCallback) -> 
signing at auth0 -> 
https://localhost:44333/api/oidc/ExternalLoginCallback(code=123123) ->

0
maliming created 8 days ago
Support Team Fullstack Developer
There are two oauth2 processes:

angular request to login (redirect is localhost:4200) , redirect to auth server(your API website)

your auth server request to login, redirect to oauth0.com (redirect is localhost:44359, the redirect url also includes the angular request.)

after login in oauth.com -> redirect to auth server( because redirect is localhost:44359)

re-request angular request(redirect is localhost:4200)

because you have login success. then generate code and redirect to localhost:4200?code=123123

angular get the code , and use the code to exchange the access_token.

The angular need to codeget access token from auth server

The auth server need to login to return the code

The auth server can login with oauth0.com

After login with oauth0.com, The auth server has login state.

The auth server now can return a code to angular

The angular use the code to get access token from auth server
0

Repunjay_TASC created 8 days ago

hi I have checked the latest har file

Can you try to set redirect_uri as http://localhost:4200 at First auth2 login request?

Your angular doesn't start the oauth2 login process.

If you can share a project that reproduces your problem, this would be the fastest way to troubleshoot the problem.

Which project you required Angular only or both Angular and the backend? Due to company policy, I can't share the entire source code. However, I can share specific files with a trimmed-down version of the project. So let me know which specific files are required?

I would suggest the fastest way to get on a 15-minute call so that you can get a good understanding of the project. This will help you suggest the exact issues and resolution steps.
0

maliming created 8 days ago
Support Team Fullstack Developer

hi

You don't need the entire project, you can try copying part of the code in your project to the POC project to reproduce the problem, I will check the POC project , this is just the login code, it should be simple.

Thanks.
0

Repunjay_TASC created 8 days ago

Hi

We have an old ABP 3.1 microservices template, but it has been upgraded to the latest version. Additionally, We have overridden the ABP login page and created a custom login template with specific changes to our project.

It is very difficult to reproduce the same issue in a POC project. I attempted to replicate the issue in the POC project, but it was not possible.

Thanks
0
maliming created 8 days ago
Support Team Fullstack Developer
hi

This has nothing to do with microservice.

Only need two projects:

angular

auth server(add oauth0.com as external login)

Angular tries to log in and get the token. That's all.
0

Repunjay_TASC created 8 days ago

I tried, but it's very difficult for me. Let me share a trimmed-down version of the project, including the Angular and Identity service projects, so you can try it from your side.
0

maliming created 8 days ago
Support Team Fullstack Developer

ok, You can create a private GitHub repo and invite me as a contributor.

https://github.com/maliming
0

Repunjay_TASC created 8 days ago

ok, You can create a private GitHub repo and invite me as a contributor.

https://github.com/maliming

I can't do this directly without permission, and I don't think they will allow me to proceed with this approach.

We cannot share our code repository outside of the organization. It's against the conduct.

I would still request a short call so you can quickly advise on how to fix the issue and suggest the proper resolution steps.
0

maliming created 8 days ago
Support Team Fullstack Developer

hi

Remote troubleshooting will take too much time, especially under poor network conditions. This can be avoided. Because your problem has nothing to do with your microservices project.

I can't do this directly without permission, and I don't think they will allow me to proceed with this approach.

The code you share will not contain any secrets. It's a simple Angular app and an auth server project with an external login provider.

You can create an open-source (app instead of app-pro) template project and add your code.
0

Repunjay_TASC created 8 days ago

hi

Remote troubleshooting will take too much time, especially under poor network conditions.

We've been discussing this issue for more than a month and it still hasn't been resolved. The best approach now is to take a call and finish this as soon as possible.

However, We hold the enterprise license (20 licenses) for the framework and requesting to take a remote session to help us in resolving this issue. This issue is highly escalated into our organization and we certainly need you to look into this matter and provide support to resolve it.
0

maliming created 8 days ago
Support Team Fullstack Developer

hi

This issue is highly escalated into our organization and we certainly need you to look into this matter and provide support to resolve it.

Can you ask other colleagues if they can reproduce the problem?

I have explained a lot of the content of the problem.

References: https://abp.io/support/questions/8267/Tenant-Id-and-Tenant-Name-Not-Set-in-Header-After-Dashboard-Redirect-SSO-OIDC?CurrentPage=2#answer-3a163ae6-c2bb-7256-cbd1-03ecdb09add8 https://abp.io/support/questions/8267/Tenant-Id-and-Tenant-Name-Not-Set-in-Header-After-Dashboard-Redirect-SSO-OIDC?CurrentPage=2#answer-3a163adf-89f4-6c29-5e28-87e18a775dd7
0

Repunjay_TASC created 8 days ago

hi

This issue is highly escalated into our organization and we certainly need you to look into this matter and provide support to resolve it.

Can you ask other colleagues if they can reproduce the problem?

I have explained a lot of the content of the problem.

References: https://abp.io/support/questions/8267/Tenant-Id-and-Tenant-Name-Not-Set-in-Header-After-Dashboard-Redirect-SSO-OIDC?CurrentPage=2#answer-3a163ae6-c2bb-7256-cbd1-03ecdb09add8 https://abp.io/support/questions/8267/Tenant-Id-and-Tenant-Name-Not-Set-in-Header-After-Dashboard-Redirect-SSO-OIDC?CurrentPage=2#answer-3a163adf-89f4-6c29-5e28-87e18a775dd7

Hi ,

I have also observed this issue in my project, but we are unsure how to fix it and are requesting your assistance with an exact solution. Additionally, i have mention there could you confirm whether my observations are correct? Please suggest any improvements.

References: https://abp.io/qa/questions/8267/3a1631ff-02f3-d3aa-8ce8-71ef2e8c7a4b https://abp.io/qa/questions/8267/3a163685-5208-701a-241c-c522991ace5a

However, we both understand what the issue is, but I am unable to resolve it, which is why we need your assistance.
0

maliming created 8 days ago
Support Team Fullstack Developer

hi

Let me see your code. But I think you still need to reproduce the problem in the end.

Please join and share your screen.

Thanks https://us05web.zoom.us/j/86954384800?pwd=rqxIqOwttMkgIKuAKD86w3KilGRFzO.1
0

maliming created 8 days ago
Support Team Fullstack Developer

hi I have checked your angular app.

The angular should init the code flow and redirect to autherver website.

This is the default behavior of abp angular app.

angular app -> click login button -> redirect to authserver website(login page.).

Can you check your app to make this?
0

Repunjay_TASC created 8 days ago

hi I have checked your angular app.

The angular should init the code flow and redirect to autherver website.

This is the default behavior of abp angular app.

angular app -> click login button -> redirect to authserver website(login page.).

Can you check your app to make this?

We are very close to resolve this issue thanks for your support.

As per the reference link you shared, I have made changes to the environment.ts file in Angular.

Earlier, this API was not called from Angular, but now it seems we've taken a step forward, and the connect/authorize method is automatically called.

Error :- error:invalid_request error_description:The specified 'redirect_uri' is not valid for this client application.

Below POC screen shot

I have cross-checked the POC and our existing project up to the connect/authorize implementation, and everything is the same. I will also share the HRA. We are very close to successfully completing the connect/authorize process, after that initiate code flow and get angular access like below POC screen shot.

please advise and thanks in advance. mean while me also looking into it
0
maliming created 8 days ago
Support Team Fullstack Developer
hi

The client_id is Litmus_App

Please check the OpenIddictApplications table's data in the database.

The RedirectUris should contains the http://localhost:4200

error:invalid_request error_description:The specified 'redirect_uri' is not valid for this client application. error_uri:https://documentation.openiddict.com/errors/ID2043
0

Repunjay_TASC created 8 days ago

this is correct way ? Still getting same issue

Showing 26 to 50 of 74 entries.

Previous
1
2 (current)
3
Next

Have an answer to this question? Log in and write your answer.

Made with ❤️ on ABP v9.1.0-preview. Updated on November 20, 2024, 13:06