* **ABP Framework version:** v4.2.2 * **UI type**: Angular * **DB provider**: EF Core * **Tiered (MVC

) or Identity Server Separated (Angular)**: yes * **Exception message and stack trace**:C:\Program

ConfigureIdentityServer and ConfigureMyIdentityServer?

hi I have change the `ConfigureMyIdentityServer` to `ConfigureIdentityServer` and try to add migrations

I have one doubt is it working for multitenant(add and remove identity server supported clients)?

and What is missed?

hi Check your `csproj` files and remove references `Volo.Abp.IdentityServer.xxx v5.1.4` using the `

* **ABP Framework version:** 5.1.4 * **UI type**: MVC * **DB provider**: EF Core * **Tiered (MVC)**:

no * **Exception message and stack trace**: * **Steps to reproduce the issue**:" Hi I am trying to

I have added the domain,domain.shared and ef modules. then removed the ignoremultitenancy support attribute

And I have added IMultiTenant to all entities related to Identityserver like clients,apiresources entities

and also mapped the tenant attribute in IdentityServerDbContextModelCreatingExtensions.cs then I am

try to remove suite and install again.

Hi alper - removed and re-installed abp suite and still getting the compilation warnings above.

Warnings are in Pages/Entity/CreateModal.cshtml and Pages/Entity/Index.cshtml.

new 2.8 solutions (I tested that) As I stated above the latest easycrm was based on 2.6 while the framework

3.x version of the framework and abp suite come out.

/ Issue / Question ** Provide the following information to reduce the conversation steps: * **ABP Framework

UI type**: MVC * **Tiered (MVC) or Identity Server Seperated (Angular)**: no * **Exception message and

stack trace**: * **Steps to reproduce the issue**: macos easycrm project abp suite 2.8 add an author entity

(per the guide) to the easycrm sample project save and generate -> generates the code with error (screenshot

* **ABP Framework version:** v3.0.4 * **UI type**: Angular / MVC * **Tiered (MVC) or Identity Server

Seperated (Angular)**: yes * **Exception message and stack trace**: An exception was thrown while activating

Server to server https/grpc calls **should not involve user** and be done with **[client credential flow

* **ABP Framework version:** v5.0.0 RC1 * **UI type**: MVC * **DB provider**: EF Core * **Tiered (MVC

) or Identity Server Separated (Angular)**: yes * **Exception message and stack trace**: * **Steps to

System.Threading.Thread.StartCallback() ``` We're trying to make a simple example, but at the moment when we try and

We're now trying to remove caching to see if the issue is, as we expect, related to caching only and

See https://support.abp.io/QA/Questions/632/How-can-I-download-the-source-code-of-the-framework-Angular-packages-theme-and-pro-modules

Hi, It seems our license has expired and the management is still discussing on whether and how to renew

> [10:19:56 WRN] ABP CLI has a newer stable version 5.3.2, please update to get the latest features and

I added the Configure and it took me to the payment page in Stripe.

00 [INF] Executed endpoint '/Payment/Stripe/PrePayment' 2023-01-04 13:33:01.383 -06:00 [DBG] Added 0 entity

changes to the current audit log 2023-01-04 13:33:01.464 -06:00 [DBG] Added 0 entity changes to the

current audit log 2023-01-04 13:33:01.465 -06:00 [DBG] Added 0 entity changes to the current audit log

hi Can you create a new template project and reproduce the problem and share the project?

* **ABP Framework version:** v5.3.0 * **UI type**: MVC * **DB provider**: EF Core * **Tiered (MVC)**

: no I am trying to integrate Stripe Payments in to my app and struggling to get things working.

for my Stripe account and webhook settings.

and the PlanId GUID that I have in the database for the GateWayPlan.

Because this is a subscription I need to have the webhook monitor payment and cancellation activity and

If you deploy identity as a separate service and use a separate database.

I have added the AbpIdentityModules to both the Application and Domain layer (added this so I can use

Autofac.Core.Activators.Reflection.DefaultConstructorFinder' on type 'Volo.Abp.Identity.IdentityDataSeeder' can be invoked with the available services and

I have added the depends on for the entity framework project and it loads well and also shows the current

Hello Team I have a solution that consists of: - one main application template (Main) and - one module

application (Account) exposed via an Http.Api.host - and an identity server seperatated used by both

* **ABP Framework version:** 4.2 * **UI type**: Angular * **DB provider**: EF Core * **Tiered (MVC

) or Identity Server Separated (Angular)**: yes * **Exception message and stack trace**: * **Steps

1) To disable email and phone number providers in 2FA and leave only the TOTP provider functional, you

If yes can you please specify its location and exact name so I can override that page and test it?

https://abp.io/docs/latest/framework/ui/mvc-razor-pages/customization-user-interface

I have removed email and phone operators from the list and they're not being shown on Two Factor Authentication

And there is another problem, when I override and enable 2FA tab in /Accounts/Manage Page manually with

Greetings, there are some problems I encountered in layered ABP solution: 1) I need to disable email and

phone number providers in 2FA and leave only TOTP provider functional, ie.

Please provide detailed instructions. 2) And I need to make it so force behavior in 2FA works with TOTP

to force, I need the app to redirect the user to Two Factor Authentication page at "/Account/Manage" and

Once the build succeeds, return to ABP Suite and try generating the entity again.

For more details on entity generation and troubleshooting, see: - https://docs.abp.io/en/abp/latest/Suite

service where I created the entity still persists, and the same error also occurs when I rebuild the

Hi, I created entity over suite and then error occur.

I suggest the first approach, you can open the relevant controller and add the required namespaces, and

Studio Version**: 1.2.1 - **Current ABP Studio Version**: 1.2.1 - **Multi-Tenancy**: Yes - **UI Framework

Libs**: Yes - **Database Provider**: ef - **Database Management System**: postgresql - **Mobile Framework

Turkish - **Default Language**: English - **Create Command**: abp new ClassifAI -t microservice --ui-framework

When I create an entity in ABP Suite, I encounter the error shown in the screenshot I attached.

Below is a step-by-step guide and code samples for both the backend (C#) and Angular frontend. ---

Extend the Permission Grant Entity Create a new entity (e.g., `UserTimeBasedPermission`) to store user-permission

Create a Repository and Service Define a repository and service to manage these grants.

permission management module if needed. --- Sources: - [ABP Permission System](https://abp.io/docs/latest/framework

You need to add two properties like this to the `PermissionGrant` entity and then check them.

1.2.2 * **Current ABP Studio Version**: 1.2.2 * **Tiered**: Yes * **Multi-Tenancy**: No * **UI Framework

Separate Tenant Schema**: No * **Create Initial Migration**: Yes * **Run Db Migrator**: Yes * **Mobile Framework

English * **Default Language**: Arabic * **Create Command**: abp new AbpSolution1 -t app --tiered --ui-framework

The idea is that permissions are active only within an optional time window—defined by StartTime and

Extend permission grants to include optional StartTime and EndTime.

error `IDX10204: Unable to validate issuer. validationParameters.ValidIssuer is null or whitespace AND

* - The issuer in the token must exactly match the value set in `OpenIddict__Validation__Issuer` and

The API container will try to reach `https://localhost:44317/` and fail, because that points to itself

Change all internal URLs to use the Docker service name and HTTP. 2.

Ensure the issuer in the token, the discovery document, and your API config all match exactly.

through the IDE locally, when it is started with docker-compose it fails at the authentication stage and

Microsoft.IdentityModel.Tokens.SecurityTokenInvalidIssuerException: IDX10204: Unable to validate issuer. validationParameters.ValidIssuer is null or whitespace AND

message: IDX10204: Unable to validate issuer. validationParameters.ValidIssuer is null or whitespace AND

visaflowapp-api | at Volo.Abp.Auditing.AuditingInterceptor.InterceptAsync(IAbpMethodInvocation invocation) And

hi Could you please share more details/log and screenshots? Thanks.

I have tried it and found that some parts work while others don't. !

- To disable auditing in ABP Framework, you should use the `[DisableAuditing]` attribute on your class

The entity is not being audited due to other global selectors or contributors. 4.

Sources: - https://abp.io/docs/latest/framework/infrastructure/audit-logging --- _This response was

You are correct: in ABP Blazor applications, backend errors should be handled and displayed to the user

The code generated by ABP Suite for Create and Update operations already wraps these calls with error

To ensure a consistent user experience and proper error feedback, the Delete operation should also use

customize your ABP Suite templates to wrap Delete calls with HandleErrorAsync(), similar to Create and

Sources: - https://abp.io/docs/latest/framework/ui/blazor/error-handling - https://abp.io/community/articles

* **Exception message and full stack trace**: * **Steps to reproduce the issue**: In the case of

Blazor server, backend errors must be caught and displayed using the HandleErrorAsync() function.

In the code generated by ABP Suite, Create and Update calls include this, but Delete does not.

but fails when calling the Create method of IdentityUserAppService with PhoneNumberConfirmed = true and

AbpValidationException or BusinessException) when trying to create a user with PhoneNumberConfirmed = true and

After adding [Fact] attribute and running the test, the `Create` method in the `IdentityUserAppService

How to add this template to text templates module, show in Grid and edit its content. !

We created new project and tried but facing same issue.

To access the template we created app service and controller in Administration service and we are able

can we connect remotely and solve it.

You can add `Application`and `Applications.Contract` modules. !

* **ABP Framework version:** v4.4.0 * **UI type**: MVC * **DB provider**: EF Core / MongoDB * ****Micro

service template** We gone through the link and tried to define new text template https://docs.abp.io

I have tried to create 2 application with app-pro template as below * **ABP Framework version:** v3.3.2

Identity Server Seperated (Angular)**: yes I have removed the Identity Server in one application and

[12:14:21 DBG] Getting claims for identity token for subject: 50d71d93-636f-f84d-d2c1-39f97c701cbe and

> Delete old tenants You just need to inject `Repositpry` and use `DeleteAsync` mehtod , like https

* **ABP Framework version:** 4.2 * **UI type**: Blazor * **DB provider**: EF Core * **Tiered (MVC) or

#### Background Our existing systems contain tables for Users and Organisations.

Users without triggering user welcome emails, and email validation etc.

I want the validation to happen when they login, and not when we import.

If you think this is the wrong approach and have a better idea then please let me know.