Activities of "imranStem"

All the configurations are done. Now when I try to log in with auth server, the login successfully done but it's not authenticated on the angular website.

administration log

[07:08:41 INF] Request starting HTTP/1.1 GET http://my-company-administration-service-v1.company-staging.svc.cluster.local/api/abp/application-configuration - 0 [07:08:41 INF] CORS policy execution successful. [07:08:41 INF] CORS policy execution successful. [07:08:41 INF] Failed to validate the token. Microsoft.IdentityModel.Tokens.SecurityTokenInvalidIssuerException: IDX10205: Issuer validation failed. Issuer: 'https://auth-server-v1.mydomain.com'. Did not match: validationParameters.ValidIssuer: 'null' or validationParameters.ValidIssuers: 'http://auth-server-v1.mydomain.com'. at Microsoft.IdentityModel.Tokens.Validators.ValidateIssuer(String issuer, SecurityToken securityToken, TokenValidationParameters validationParameters) at System.IdentityModel.Tokens.Jwt.JwtSecurityTokenHandler.ValidateIssuer(String issuer, JwtSecurityToken jwtToken, TokenValidationParameters validationParameters) at System.IdentityModel.Tokens.Jwt.JwtSecurityTokenHandler.ValidateTokenPayload(JwtSecurityToken jwtToken, TokenValidationParameters validationParameters) at System.IdentityModel.Tokens.Jwt.JwtSecurityTokenHandler.ValidateToken(String token, TokenValidationParameters validationParameters, SecurityToken& validatedToken) at Microsoft.AspNetCore.Authentication.JwtBearer.JwtBearerHandler.HandleAuthenticateAsync() [07:08:41 INF] Bearer was not authenticated. Failure message: IDX10205: Issuer validation failed. Issuer: 'https://auth-server-v1.mydomain.com'. Did not match: validationParameters.ValidIssuer: 'null' or validationParameters.ValidIssuers: 'http://auth-server-v1.mydomain.com'. [07:08:41 INF] Executing endpoint 'Volo.Abp.AspNetCore.Mvc.ApplicationConfigurations.AbpApplicationConfigurationController.GetAsync (Volo.Abp.AspNetCore.Mvc)' [07:08:41 INF] Route matched with {area = "abp", action = "Get", controller = "AbpApplicationConfiguration", page = ""}. Executing controller action with signature System.Threading.Tasks.Task`1[Volo.Abp.AspNetCore.Mvc.ApplicationConfigurations.ApplicationConfigurationDto] GetAsync() on controller Volo.Abp.AspNetCore.Mvc.ApplicationConfigurations.AbpApplicationConfigurationController (Volo.Abp.AspNetCore.Mvc). [07:08:41 WRN] The cookie 'XSRF-TOKEN' has set 'SameSite=None' and must also set 'Secure'. [07:08:41 INF] Executing ObjectResult, writing value of type 'Volo.Abp.AspNetCore.Mvc.ApplicationConfigurations.ApplicationConfigurationDto'. [07:08:41 INF] Executed action Volo.Abp.AspNetCore.Mvc.ApplicationConfigurations.AbpApplicationConfigurationController.GetAsync (Volo.Abp.AspNetCore.Mvc) in 108.1989ms [07:08:41 INF] Executed endpoint 'Volo.Abp.AspNetCore.Mvc.ApplicationConfigurations.AbpApplicationConfigurationController.GetAsync (Volo.Abp.AspNetCore.Mvc)' [07:08:41 INF] Request finished HTTP/1.1 GET http://company-staging-administration-service-v1.company-staging.svc.cluster.local/api/abp/application-configuration - 0 - 200

I have changed the ocelot values in config map with the service's endpoint address and the above issue is fixed but is this the correct configuration to use the service endpoint instead of the domain URL in the production?

I have sent an email with the details.

As I deployed microservices on Kubernetes, Do I need to follow Kubernetes ocelot configuration as per below?

https://ocelot.readthedocs.io/en/latest/features/kubernetes.html

The web gate has the following error logs. [13:52:15 INF] Request starting HTTP/1.1 GET http://web-gateway-v1.mydomain.com/api/abp/application-configuration - - [13:52:15 INF] CORS policy execution successful. [13:52:15 INF] requestId: 0HMHTGPHDTLLU:00000002, previousRequestId: no previous request id, message: EndpointRateLimiting is not enabled for /api/abp/{everything} [13:52:15 INF] requestId: 0HMHTGPHDTLLU:00000002, previousRequestId: no previous request id, message: No authentication needed for /api/abp/application-configuration [13:52:15 INF] requestId: 0HMHTGPHDTLLU:00000002, previousRequestId: no previous request id, message: /api/abp/{everything} route does not require user to be authorized [13:52:15 WRN] requestId: 0HMHTGPHDTLLU:00000002, previousRequestId: no previous request id, message: Error Code: ConnectionToDownstreamServiceError Message: Error connecting to downstream service, exception: System.Net.Http.HttpRequestException: The SSL connection could not be established, see inner exception. ---> System.IO.IOException: Cannot determine the frame size or a corrupted frame was received. at System.Net.Security.SslStream.GetFrameSize(ReadOnlySpan1 buffer) at System.Net.Security.SslStream.ReceiveBlobAsync[TIOAdapter](TIOAdapter adapter) at System.Net.Security.SslStream.ForceAuthenticationAsync[TIOAdapter](TIOAdapter adapter, Boolean receiveFirst, Byte[] reAuthenticationData, Boolean isApm) at System.Net.Http.ConnectHelper.EstablishSslConnectionAsync(SslClientAuthenticationOptions sslOptions, HttpRequestMessage request, Boolean async, Stream stream, CancellationToken cancellationToken) --- End of inner exception stack trace --- at System.Net.Http.ConnectHelper.EstablishSslConnectionAsync(SslClientAuthenticationOptions sslOptions, HttpRequestMessage request, Boolean async, Stream stream, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.ConnectAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.CreateHttp11ConnectionAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.AddHttp11ConnectionAsync(HttpRequestMessage request) at System.Threading.Tasks.TaskCompletionSourceWithCancellation1.WaitWithCancellationAsync(CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.GetHttp11ConnectionAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.SendWithVersionDetectionAndRetryAsync(HttpRequestMessage request, Boolean async, Boolean doRequestAuth, CancellationToken cancellationToken) at System.Net.Http.DiagnosticsHandler.SendAsyncCore(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpClient.<SendAsync>g__Core|83_0(HttpRequestMessage request, HttpCompletionOption completionOption, CancellationTokenSource cts, Boolean disposeCts, CancellationTokenSource pendingRequestsCts, CancellationToken originalCancellationToken) at Ocelot.Requester.HttpClientHttpRequester.GetResponse(HttpContext httpContext) errors found in ResponderMiddleware. Setting error response for request path:/api/abp/application-configuration, request method: GET [13:52:15 INF] Request finished HTTP/1.1 GET http://web-gateway-v1.mydomain.com/api/abp/application-configuration - - - 502 0 - 34.2504ms

I checked with http as well but I am getting following error in swagger when try to authorise.

Can you please provide your email so I can share all domain details with you?

The swagger issue is fixed. Now I have an authority issue.

If I use the https then I am getting the following error.

[12:27:43 INF] Request starting HTTP/1.1 GET http://saas-service-v1.mydomain.com/api/abp/api-definition - - [12:27:44 ERR] Exception occurred while processing message. System.InvalidOperationException: IDX20803: Unable to obtain configuration from: 'https://auth-server-v1.mydomain.com/. ---> System.IO.IOException: IDX20804: Unable to retrieve document from: 'https://auth-server-v1.mydomain.com/'. ---> System.Net.Http.HttpRequestException: The SSL connection could not be established, see inner exception. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure: RemoteCertificateNameMismatch at System.Net.Security.SslStream.SendAuthResetSignal(ProtocolToken message, ExceptionDispatchInfo exception) at System.Net.Security.SslStream.CompleteHandshake(SslAuthenticationOptions sslAuthenticationOptions) at System.Net.Security.SslStream.ForceAuthenticationAsync[TIOAdapter](TIOAdapter adapter, Boolean receiveFirst, Byte[] reAuthenticationData, Boolean isApm) at System.Net.Http.ConnectHelper.EstablishSslConnectionAsync(SslClientAuthenticationOptions sslOptions, HttpRequestMessage request, Boolean async, Stream stream, CancellationToken cancellationToken) --- End of inner exception stack trace --- at System.Net.Http.ConnectHelper.EstablishSslConnectionAsync(SslClientAuthenticationOptions sslOptions, HttpRequestMessage request, Boolean async, Stream stream, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.ConnectAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.CreateHttp11ConnectionAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.AddHttp11ConnectionAsync(HttpRequestMessage request) at System.Threading.Tasks.TaskCompletionSourceWithCancellation1.WaitWithCancellationAsync(CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.GetHttp11ConnectionAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.SendWithVersionDetectionAndRetryAsync(HttpRequestMessage request, Boolean async, Boolean doRequestAuth, CancellationToken cancellationToken) at System.Net.Http.DiagnosticsHandler.SendAsyncCore(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.RedirectHandler.SendAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpClient.<SendAsync>g__Core|83_0(HttpRequestMessage request, HttpCompletionOption completionOption, CancellationTokenSource cts, Boolean disposeCts, CancellationTokenSource pendingRequestsCts, CancellationToken originalCancellationToken) at Microsoft.IdentityModel.Protocols.HttpDocumentRetriever.GetDocumentAsync(String address, CancellationToken cancel) --- End of inner exception stack trace --- at Microsoft.IdentityModel.Protocols.HttpDocumentRetriever.GetDocumentAsync(String address, CancellationToken cancel) at Microsoft.IdentityModel.Protocols.OpenIdConnect.OpenIdConnectConfigurationRetriever.GetAsync(String address, IDocumentRetriever retriever, CancellationToken cancel) at Microsoft.IdentityModel.Protocols.ConfigurationManager1.GetConfigurationAsync(CancellationToken cancel) --- End of inner exception stack trace ---

and If I use the http with RequireHttpsMetadata false then I am not able to login, swagger throw below exception.

I have fixed the certificate issue. All gateway, auth server, and services running except administration microservice. Getting the following error on administration microservice.

  [11:00:32 INF] Request starting HTTP/1.1 GET http://administration-service-v1.mydomain.com/ - -

[11:00:33 ERR] Connection id "0HMHTEIFHUIB3", Request id "0HMHTEIFHUIB3:00000002": An unhandled exception was thrown by the application. Autofac.Core.DependencyResolutionException: An exception was thrown while activating Swashbuckle.AspNetCore.SwaggerGen.SwaggerGenerator -> λ:Swashbuckle.AspNetCore.SwaggerGen.SwaggerGeneratorOptions -> Microsoft.Extensions.Options.UnnamedOptionsManager1[[Swashbuckle.AspNetCore.SwaggerGen.SwaggerGeneratorOptions, Swashbuckle.AspNetCore.SwaggerGen, Version=6.2.1.0, Culture=neutral, PublicKeyToken=d84d99fb0135530a]] -> Microsoft.Extensions.Options.OptionsFactory1[[Swashbuckle.AspNetCore.SwaggerGen.SwaggerGeneratorOptions, Swashbuckle.AspNetCore.SwaggerGen, Version=6.2.1.0, Culture=neutral, PublicKeyToken=d84d99fb0135530a]] -> λ:Microsoft.Extensions.Options.IConfigureOptions1[[Swashbuckle.AspNetCore.SwaggerGen.SwaggerGeneratorOptions, Swashbuckle.AspNetCore.SwaggerGen, Version=6.2.1.0, Culture=neutral, PublicKeyToken=d84d99fb0135530a]][] -> Swashbuckle.AspNetCore.SwaggerGen.ConfigureSwaggerGeneratorOptions. ---> Autofac.Core.DependencyResolutionException: An exception was thrown while invoking the constructor 'Void .ctor(Microsoft.Extensions.Options.IOptions1[Swashbuckle.AspNetCore.SwaggerGen.SwaggerGenOptions], System.IServiceProvider, Microsoft.AspNetCore.Hosting.IWebHostEnvironment)' on type 'ConfigureSwaggerGeneratorOptions'. ---> System.UriFormatException: Invalid URI: The format of the URI could not be determined. at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind, UriCreationOptions& creationOptions) at System.Uri..ctor(String uriString) at Microsoft.Extensions.DependencyInjection.AbpSwaggerGenServiceCollectionExtensions.<>c__DisplayClass1_0.<AddAbpSwaggerGenWithOAuth>b__0(SwaggerGenOptions options) at Microsoft.Extensions.Options.ConfigureNamedOptions1.Configure(String name, TOptions options) at Microsoft.Extensions.Options.OptionsFactory1.Create(String name) at Microsoft.Extensions.Options.UnnamedOptionsManager1.get_Value() at lambda_method3(Closure , Object[] ) at Autofac.Core.Activators.Reflection.BoundConstructor.Instantiate() --- End of inner exception stack trace --- at Autofac.Core.Activators.Reflection.BoundConstructor.Instantiate() at Autofac.Core.Activators.Reflection.ReflectionActivator.ActivateInstance(IComponentContext context, IEnumerable1 parameters) at Autofac.Core.Activators.Reflection.ReflectionActivator.<ConfigurePipeline>b__11_0(ResolveRequestContext ctxt, Action1 next) at Autofac.Core.Resolving.Middleware.DelegateMiddleware.Execute(ResolveRequestContext context, Action1 next) at Autofac.Core.Resolving.Pipeline.ResolvePipelineBuilder.<>c__DisplayClass14_0.<BuildPipeline>b__1(ResolveRequestContext ctxt) at Autofac.Core.Resolving.Middleware.DisposalTrackingMiddleware.Execute(ResolveRequestContext context, Action1 next) at Autofac.Core.Resolving.Pipeline.ResolvePipelineBuilder.<>c__DisplayClass14_0.<BuildPipeline>b__1(ResolveRequestContext ctxt) at Autofac.Core.Resolving.Middleware.ActivatorErrorHandlingMiddleware.Execute(ResolveRequestContext context, Action1 next) --- End of inner exception stack trace --- at Autofac.Core.Resolving.Middleware.ActivatorErrorHandlingMiddleware.Execute(ResolveRequestContext context, Action1 next) at Autofac.Core.Resolving.Pipeline.ResolvePipelineBuilder.<>c__DisplayClass14_0.<BuildPipeline>b__1(ResolveRequestContext ctxt) at Autofac.Core.Pipeline.ResolvePipeline.Invoke(ResolveRequestContext ctxt) at Autofac.Core.Resolving.Middleware.RegistrationPipelineInvokeMiddleware.Execute(ResolveRequestContext context, Action1 next) at Autofac.Core.Resolving.Pipeline.ResolvePipelineBuilder.<>c__DisplayClass14_0.<BuildPipeline>b__1(ResolveRequestContext ctxt) at Autofac.Core.Resolving.Middleware.SharingMiddleware.Execute(ResolveRequestContext context, Action1 next) at Autofac.Core.Resolving.Pipeline.ResolvePipelineBuilder.<>c__DisplayClass14_0.<BuildPipeline>b__1(ResolveRequestContext ctxt) at Autofac.Core.Resolving.Pipeline.ResolvePipelineBuilder.<>c__DisplayClass14_0.<BuildPipeline>b__1(ResolveRequestContext ctxt) at Autofac.Core.Resolving.Middleware.CircularDependencyDetectorMiddleware.Execute(ResolveRequestContext context, Action1 next) at Autofac.Core.Resolving.Pipeline.ResolvePipelineBuilder.<>c__DisplayClass14_0.<BuildPipeline>b__1(ResolveRequestContext ctxt) at Autofac.Core.Pipeline.ResolvePipeline.Invoke(ResolveRequestContext ctxt) at Autofac.Core.Resolving.ResolveOperation.GetOrCreateInstance(ISharingLifetimeScope currentOperationScope, ResolveRequest request) at Autofac.Core.Resolving.ResolveOperation.ExecuteOperation(ResolveRequest request) at Autofac.Core.Resolving.ResolveOperation.Execute(ResolveRequest request) at Autofac.Core.Lifetime.LifetimeScope.ResolveComponent(ResolveRequest request)

I have the following configuration in the administration microservice.

{ "App": { "SelfUrl": "https://administration-service-v1.mydomain.com", "CorsOrigins": "https://*.mydomain.com,http://*.mydomain.com" }, "AuthServer": { "Authority": "http://auth-server-v1.mydomain.com", "RequireHttpsMetadata": "false", "SwaggerClientId": "WebGateway_Swagger", "SwaggerClientSecret": "1q2w3e*" }, "RemoteServices": { "AbpIdentity": { "BaseUrl": "https://identity-service-v1.mydomain.com/", "UseCurrentAccessToken": "false" } }, "IdentityClients": { "Default": { "GrantType": "client_credentials", "ClientId": "ChurchPharmacy_AdministrationService", "ClientSecret": "1q2w3e*", "Authority": "https://auth-server-v1.mydomain.com", "Scope": "IdentityService" } }, "Logging": { "LogLevel": { "Default": "Information", "Microsoft": "Warning", "Microsoft.Hosting.Lifetime": "Information" } }, "AllowedHosts": "*", "ConnectionStrings": { "AdministrationService": "-", "SaasService": "-" }, "StringEncryption": { "DefaultPassPhrase": "3VCRVu2hISrQLlgo" }, "Redis": { "Configuration": "localhost:6379" }, "ElasticSearch": { "Url": "http://localhost:9200" }, "Settings": { "Volo.Abp.LeptonTheme.Style": "Style6", "Volo.Abp.LeptonTheme.Style.PublicLayout": "Style5" } }

I also want to share the domain URLs with you so you can check your side as well and you can give me proper solutions.

As you notice in the above configuration, I have set the authority without HTTPS so when I check the authorized api with swagger, its not working.

I have the certificate file and key and I created the secret from the certificate file. Still I ned to use lets encrypt?

I have installed cert-manager and lets-encrypt issuer and run following command.

kubectl get certificates -n churchpharmacy

and my certificate ready status is false.

I downloaded microservice templates using AbpSuite. I modified the yaml files for all the applications in K8s folder and deployed the application on Kubernetes cluster. I also created the secret in the same namespace which is applied on application ingress but still, I am getting the invalid certificate issue.

Do I need to modified anything else in yaml file?

• ABP Framework version: v5.2.0
• UI type: Angular / MVC
• DB provider: EF Core
• Tiered (MVC) or Identity Server Separated (Angular): yes
• Exception message and stack trace:
• Steps to reproduce the issue:"

I called endpoint from web gateway swagger for administration api with authenticate.

Here is the details error log

System.InvalidOperationException: IDX20803: Unable to obtain configuration from: 'https://auth-server-v1.mycustomdomain/.well-known/openid-configuration'. at Microsoft.IdentityModel.Protocols.ConfigurationManager.GetConfigurationAsync(CancellationToken cancel) at Microsoft.AspNetCore.Authentication.JwtBearer.JwtBearerHandler.HandleAuthenticateAsync() at Microsoft.AspNetCore.Authentication.JwtBearer.JwtBearerHandler.HandleAuthenticateAsync() [15:06:12 ERR] Connection id "0HMHORVK9TC8J", Request id "0HMHORVK9TC8J:00000003": An unhandled exception was thrown by the application. System.InvalidOperationException: IDX20803: Unable to obtain configuration from: 'https://auth-server-v1.mycustomdomain/.well-known/openid-configuration'. at Microsoft.IdentityModel.Protocols.ConfigurationManager`1.GetConfigurationAsync(CancellationToken cancel) at Microsoft.AspNetCore.Authentication.JwtBearer.JwtBearerHandler.HandleAuthenticateAsync() at Microsoft.AspNetCore.Authentication.JwtBearer.JwtBearerHandler.HandleAuthenticateAsync() . . . [15:06:12 INF] Request finished HTTP/1.1 GET http://administration-service-v1.mycustomdomain/api/abp/api-definition - - - 500 0 - 6.5378ms

When I called the /api/abp/api-configuration end point from swagger without authenticate ithen its working file but with authenticate, its throwing exceltion.