Starts in:
3 DAYS
13 HRS
3 MIN
3 SEC
Starts in:
3 D
13 H
3 M
3 S

ABP CLI

ABP CLI (Command Line Interface) is a command line tool to perform some common operations for ABP based solutions or ABP Studio features.

With v8.2+, the old/legacy ABP CLI has been replaced with a new CLI system to align with the new templating system and ABP Studio. The new ABP CLI commands are explained in this documentation. However, if you want to learn more about the differences between the old and new CLIs, want to learn the reason for the change, or need guidance to use the old ABP CLI, please refer to the Old vs New CLI documentation.

You may need to remove the Old CLI before installing the New CLI, by running the following command: dotnet tool uninstall -g Volo.Abp.Cli

Installation

ABP CLI is a dotnet global tool. Install it using a command line window:

dotnet tool install -g Volo.Abp.Studio.Cli

To update an existing installation:

dotnet tool update -g Volo.Abp.Studio.Cli

Global Options

While each command may have a set of options, there are some global options that can be used with any command;

  • --skip-cli-version-check or -scvc: Skips to check the latest version of the ABP CLI. If you don't specify, it will check the latest version and shows a warning message if there is a newer version of the ABP CLI.
  • --skip-extension-version-check or -sevc: Skips to check the latest version of the ABP CLI extensions. If you don't specify, it will check the latest version and download the latest version if there is a newer version of the ABP CLI extensions.
  • --old: ABP CLI has two variations: Volo.Abp.Studio.Cli and Volo.Abp.Cli. New features/templates are added to the Volo.Abp.Studio.Cli. But if you want to use the old version, you can use this option at the end of your commands. For example, abp new Acme.BookStore --old.
  • --help or -h: Shows help for the specified command.

Commands

Here, is the list of all available commands before explaining their details:

  • help: Shows help on the usage of the ABP CLI.
  • cli: Update or remove ABP CLI.
  • new: Generates a new solution based on the ABP startup templates.
  • new-module: Generates a new module based on the given template.
  • new-package: Generates a new package based on the given template.
  • update: Automatically updates all ABP related NuGet and NPM packages in a solution.
  • clean: Deletes all BIN and OBJ folders in the current folder.
  • add-package: Adds an ABP package to a project.
  • add-package-ref: Adds package to given project.
  • install-module: Adds a multi-package application module to a given module.
  • install-local-module: Installs a local module to given module.
  • list-modules: Lists names of open-source application modules.
  • list-templates: Lists the names of available templates to create a solution.
  • get-source: Downloads the source code of a module.
  • add-source-code: Downloads the source code and replaces package references with project references.
  • init-solution: Creates ABP Studio configuration files for a given solution.
  • kube-connect: Connects to kubernetes environment. (Available for Business or higher licenses)
  • kube-intercept: Intercepts a service running in Kubernetes environment. (Available for Business or higher licenses)
  • list-module-sources: Lists the remote module sources.
  • add-module-source: Adds a remote module source.
  • delete-module-source: Deletes a remote module source.
  • generate-proxy: Generates client side proxies to use HTTP API endpoints.
  • remove-proxy: Removes previously generated client side proxies.
  • switch-to-preview: Switches to the latest preview version of the ABP.
  • switch-to-nightly: Switches to the latest nightly builds of the ABP related packages on a solution.
  • switch-to-stable: Switches to the latest stable versions of the ABP related packages on a solution.
  • switch-to-local: Changes NuGet package references on a solution to local project references.
  • upgrade: It converts the application to use pro modules.
  • translate: Simplifies to translate localization files when you have multiple JSON localization files in a source control repository.
  • login: Authenticates on your computer with your abp.io username and password.
  • login-info: Shows the current user's login information.
  • logout: Logouts from your computer if you've authenticated before.
  • bundle: Generates script and style references for ABP Blazor and MAUI Blazor project.
  • install-libs: Install NPM Packages for MVC / Razor Pages and Blazor Server UI types.
  • clear-download-cache: Clears the templates download cache.
  • check-extensions: Checks the latest version of the ABP CLI extensions.
  • install-old-cli: Installs old ABP CLI.
  • generate-razor-page: Generates a page class that you can use it in the ASP NET Core pipeline to return an HTML page.

help

Shows basic usages of the ABP CLI.

Usage:

abp help [command-name]

Examples:

abp help        # Shows a general help.
abp help new    # Shows help about the "new" command.

cli

Update or remove ABP CLI.

Usage:

abp cli [command-name]

Examples:

abp cli update
abp cli update --preview
abp cli update --version 1.0.0
abp cli remove
abp cli check-version
abp cli clear-cache

new

Generates a new solution based on the ABP startup templates.

Usage:

abp new <solution-name> [options]

Examples:

abp new Acme.BookStore
  • Acme.BookStore is the solution name here.
  • Common convention is to name a solution is like YourCompany.YourProject. However, you can use different naming like YourProject (single level namespacing) or YourCompany.YourProduct.YourModule (three levels namespacing).

For more samples, go to ABP CLI Create Solution Samples

Options

  • --template or -t: Specifies the template name. Default template name is app, which generates a application solution. Available templates:
    • empty: Empty solution template.
    • app: Application template. Additional options:
      • --ui-framework or -u: Specifies the UI framework. Default framework is mvc. Available frameworks:
        • mvc: ASP.NET Core MVC. There are some additional options for this template:
          • --tiered: Creates a tiered solution where Web and Http API layers are physically separated. If not specified, it creates a layered solution which is less complex and suitable for most scenarios. (Available for Team or higher licenses)
        • angular: Angular UI. There are some additional options for this template:
          • --tiered: The Auth Server project comes as a separate project and runs at a different endpoint. It separates the Auth Server from the API Host application. If not specified, you will have a single endpoint in the server side. (Available for Team or higher licenses)
          • --progressive-web-app or -pwa: Specifies the project as Progressive Web Application.
        • blazor-webapp: Blazor Web App UI. There are some additional options for this template:
          • --tiered: The Auth Server and the API Host project comes as separate projects and run at different endpoints. It has 3 startup projects: HttpApi.Host, AuthServer and Blazor and and each runs on different endpoints. If not specified, you will have a single endpoint for your web project.
          • --progressive-web-app or -pwa: Specifies the project as Progressive Web Application.
        • blazor: Blazor UI. There are some additional options for this template:
          • --tieredThe Auth Server project comes as a separate project and runs at a different endpoint. It separates the Auth Server from the API Host application. If not specified, you will have a single endpoint in the server side. (Available for Team or higher licenses)
          • --progressive-web-app or -pwa: Specifies the project as Progressive Web Application.
        • blazor-server: Blazor Server UI. There are some additional options for this template:
          • --tiered: The Auth Server and the API Host project comes as separate projects and run at different endpoints. It has 3 startup projects: HttpApi.Host, AuthServer and Blazor and and each runs on different endpoints. If not specified, you will have a single endpoint for your web project. (Available for Team or higher licenses)
        • maui-blazor: Blazor Maui UI (Available for Team or higher licenses). There are some additional options for this template:
          • --tiered: The Auth Server and the API Host project comes as separate projects and run at different endpoints. It has 3 startup projects: HttpApi.Host, AuthServer and Blazor and and each runs on different endpoints. If not specified, you will have a single endpoint for your web project.
        • no-ui: Without UI. No front-end layer will be created. There are some additional options for this template:
          • --tiered: The Auth Server project comes as a separate project and runs at a different endpoint. It separates the Auth Server from the API Host application. If not specified, you will have a single endpoint in the server side. (Available for Team or higher licenses)
      • --mobile or -m: Specifies the mobile application framework. Default value is none. Available frameworks:
        • none: Without any mobile application.
        • react-native: React Native. This mobile option is only available for active license owners.
        • maui: MAUI. This mobile option is only available for ABP. (Available for Team or higher licenses)
      • --database-provider or -d: Specifies the database provider. Default provider is ef. Available providers:
        • ef: Entity Framework Core.
        • mongodb: MongoDB.
      • --connection-string or -cs: Overwrites the default connection strings in all appsettings.json files. The default connection string is Server=localhost;Database=MyProjectName;Trusted_Connection=True for EF Core and it is configured to use the SQL Server. If you want to use the EF Core, but need to change the DBMS, you can change it as described here (after creating the solution).
      • --skip-migrations or -sm: Skips the creating initial database migration step.
      • --skip-migrator or -smr: Skips the run database migrator step.
      • --public-website: Public Website is a front-facing website for describing your project, listing your products and doing SEO for marketing purposes. Users can login and register on your website with this website. This option is only included in PRO templates.
        • --without-cms-kit: When you add a public website to your solution, it automatically includes the CmsKit module. If you don't want to include CmsKit, you can use this parameter.
      • --separate-tenant-schema: Creates a different DbContext for tenant schema. If not specified, the tenant schema is shared with the host schema. This option is only included in PRO templates.
      • --sample-crud-page or -scp: It adds the BookStore sample to your solution.
      • --theme or -th: Specifes the theme. Default theme is leptonx. Available themes:
        • leptonx: LeptonX Theme. (Available for Team or higher licenses)
        • leptonx-lite: LeptonX-Lite Theme.
        • basic: Basic Theme.
      • --use-open-source-templateor -uost: Uses the open-source template. (Available for Team or higher licenses)
    • app-nolayers: Single-layer application template. Additional options:
      • --ui-framework or -u: Specifies the UI framework. Default framework is mvc. Available frameworks:
        • mvc: ASP.NET Core MVC. There are some additional options for this template:
        • angular: Angular UI. There are some additional options for this template:
        • blazor: Blazor UI. There are some additional options for this template:
        • blazor-server: Blazor Server UI. There are some additional options for this template:
        • no-ui: Without UI. No front-end layer will be created. There are some additional options for this template:
      • --database-provider or -d: Specifies the database provider. Default provider is ef. Available providers:
        • ef: Entity Framework Core.
        • mongodb: MongoDB.
      • --connection-string or -cs: Overwrites the default connection strings in all appsettings.json files. The default connection string is Server=localhost;Database=MyProjectName;Trusted_Connection=True for EF Core and it is configured to use the SQL Server. If you want to use the EF Core, but need to change the DBMS, you can change it as described here (after creating the solution).
      • --skip-migrations or -sm: Skips the creating initial database migration step.
      • --skip-migrator or -smr: Skips the run database migrator step.
      • --sample-crud-page or -scp: It adds the BookStore sample to your solution.
      • --theme: Specifes the theme. Default theme is leptonx. Available themes:
        • leptonx: LeptonX Theme. (Available for Team or higher licenses)
        • leptonx-lite: LeptonX-Lite Theme.
        • basic: Basic Theme.
      • --use-open-source-templateor -uost: Uses the open-source template. (Available for Team or higher licenses)
    • microservice: Microservice solution template (Available for Business or higher licenses). Additional options:
      • --ui-framework or -u: Specifies the UI framework. Default framework is mvc. Available frameworks:
        • mvc: ASP.NET Core MVC. There are some additional options for this template:
        • angular: Angular UI. There are some additional options for this template:
        • blazor: Blazor UI. There are some additional options for this template:
        • blazor-server: Blazor Server UI. There are some additional options for this template:
        • maui-blazor: Blazor Maui UI. There are some additional options for this template:
        • no-ui: Without UI. No front-end layer will be created. There are some additional options for this template:
      • --mobile or -m: Specifies the mobile application framework. Default value is none. Available frameworks:
        • none: Without any mobile application.
        • react-native: React Native.
        • maui: MAUI.
      • --database-provider or -d: Specifies the database provider. Default provider is ef. Available providers:
        • ef: Entity Framework Core.
        • mongodb: MongoDB.
      • --theme: Specifes the theme. Default theme is leptonx. Available themes:
        • leptonx: LeptonX Theme.
        • basic: Basic Theme.
      • --public-website: Public Website is a front-facing website for describing your project, listing your products and doing SEO for marketing purposes. Users can login and register on your website with this website. This option is only included in PRO templates.
  • --output-folder or -o: Specifies the output folder. Default value is the current directory.
  • --local-framework-ref or -lfr: Uses local projects references to the ABP framework instead of using the NuGet packages. It tries to find the paths from ide-state.json. The file is located at %UserProfile%\.abp\studio\ui\ide-state.json (for Windows) and ~/.abp/studio/ui/ide-state.json (for MAC).
  • --create-solution-folder or -csf: Specifies if the project will be in a new folder in the output folder or directly the output folder.
  • --database-management-system or -dbms: Sets the database management system. Default is SQL Server. Supported DBMS's:
    • SqlServer
    • MySQL
    • PostgreSQL
    • SQLite (app & app-nolayers)
    • Oracle (app & app-nolayers)
    • Oracle-Devart (app & app-nolayers)
  • --dont-run-install-libs: Skip installing client side packages.
  • --dont-run-bundling: Skip bundling for Blazor packages.
  • --no-kubernetes-configuration or -nkc: Skips the Kubernetes configuration files.
  • --no-social-logins or -nsl: Skipts the social login configuration.
  • Module Options: You can skip some modules if you don't want to add them to your solution (Available for Team or higher licenses). Available commands:
    • -no-saas: Skips the Saas module.
    • -no-gdpr: Skips the GDPR module.
    • -no-openiddict-admin-ui: Skips the OpenIddict Admin UI module.
    • -no-audit-logging: Skips the Audit Logging module.
    • -no-file-management: Skips the File Management module.
    • -no-language-management: Skips the Language Management module.
    • -no-text-template-management: Skips the Text Template Management module.
    • -no-chat: Skips the Chat module.
  • --legacy: Generates a legacy solution.
    • trust-version: Trusts the user's version and does not check if the version exists or not. If the template with the given version is found in the cache, it will be used, otherwise throws an exception.

new-module

Generates a new module.

abp new-module <module-name> [options]

Examples:

abp new-module Acme.BookStore -t module:ddd

options

  • --template or -t: Specifies the template name. Default template name is module:ddd, which generates a DDD module. Module templates are provided by the main template, see their own startup template documentation for available modules. empty:empty and module:ddd template is available for all solution structure.
  • --output-folder or -o: Specifies the output folder. Default value is the current directory.
  • --target-solution or -ts: If set, the new module will be added to the given solution. Otherwise the new module will added to the closest solution in the file system. If no solution found, it will throw an error.
  • --solution-folder or -sf: Specifies the target folder in the Solution Explorer virtual folder system.
  • --database-provider or -d: Specifies the database provider. Default provider is ef. This option is only available if the module template supports it. You can add multiple values separated by commas, such as ef,mongodb if the module template supports it. Available providers:
    • ef: Entity Framework Core.
    • mongodb: MongoDB.
  • --ui-framework or -u: Specifies the UI framework. This option is only available if the module template supports it. You can add multiple values separated by commas, such as mvc,angular if the module template supports it. Available frameworks:
    • mvc: ASP.NET Core MVC.
    • angular: Angular UI.
    • blazor: Blazor UI.
    • blazor-server: Blazor Server UI.

new-package

Generates a new package.

abp new-package [options]

Examples:

abp new-package --name Acme.BookStore.Domain --template lib.domain

options

  • --template or -t: Specifies the template name. This parameter doesn't have a default value and must be set. Available templates and their sub-options:
    • lib.class-library
    • lib.domain-shared
    • lib.domain
    • lib.application-contracts
    • lib.application
      • --with-automapper: Adds automapper configuration.
    • lib.ef
      • --include-migrations: Allows migration operations on this package.
      • --connection-string-name: Default value is the last part of the package's namespace (or package name simply).
      • --connection-string: Connection string value. Defaut value is null. You can set it alter.
    • lib.mongodb
    • lib.http-api
    • lib.http-api-client
    • lib.mvc
    • lib.blazor
    • lib.blazor-wasm
    • lib.blazor-server
    • host.http-api
      • --with-serilog: Includes Serilog configuration.
      • --with-swagger: Includes Swagger configuration.
    • host.mvc
      • --with-serilog: Includes Serilog configuration.
      • --with-swagger: Includes Swagger configuration.
    • host.blazor-wasm
      • --backend: Name of the backend project in the module (not path).
    • host.blazor-server
    • csharp.console
    • csharp.library
  • --module-file or -m: If set, the new package will be added to the given module. Otherwise the new package will added to the closest module in the file system. If no module found, it will throw an error.
  • --name or -n: Specifies the name of the package. If not set, a name based on the template type and module name will be generated.
  • --folder or -f: Specifies the target folder in the target module's virtual folder system.

update

Updating all ABP related packages can be tedious since there are many packages of the framework and modules. This command automatically updates all ABP related NuGet and NPM packages in a solution or project to the latest versions. You can run it in the root folder of your solutions.

Usage:

abp update [options]
  • If you run in a directory with a .csproj file, it updates all ABP related packages of the project to the latest versions.
  • If you run in a directory with a .sln file, it updates all ABP related packages of the all projects of the solution to the latest versions.
  • If you run in a directory that contains multiple solutions in sub-folders, it can update all the solutions, including Angular projects.

Note that this command can upgrade your solution from a previous version, and also can upgrade it from a preview release to the stable release of the same version.

Options

  • --npm: Only updates NPM packages.
  • --nuget: Only updates NuGet packages.
  • --solution-path or -sp: Specify the solution path. Use the current directory by default
  • --solution-name or -sn: Specify the solution name. Search *.sln files in the directory by default.
  • --check-all: Check the new version of each package separately. Default is false.
  • --version or -v: Specifies the version to use for update. If not specified, latest version is used.

clean

Deletes all BIN and OBJ folders in the current folder.

Usage:

abp clean

add-package

Adds an ABP package to a project by,

  • Adding related nuget package as a dependency to the project.
  • Adding [DependsOn(...)] attribute to the module class in the project (see the module development document).

Notice that the added module may require additional configuration which is generally indicated in the documentation of the related package.

Basic usage:

abp add-package <package-name> [options]

Examples:

abp add-package Volo.Abp.AspNetCore.Mvc.UI.Theme.Basic
  • This example adds the Volo.Abp.AspNetCore.Mvc.UI.Theme.Basic package to the project.

Options

  • --project or -p: Specifies the project (.csproj) file path. If not specified, CLI tries to find a .csproj file in the current directory.
  • --with-source-code: Downloads the source code of the package to your solution folder and uses local project references instead of NuGet/NPM packages.
  • --add-to-solution-file: Adds the downloaded package to your solution file, so you will also see the package when you open the solution on a IDE. (only available when --with-source-code is True)

Currently only the source code of the basic theme packages(MVC and Blazor) can be downloaded.

  • Volo.Abp.AspNetCore.Mvc.UI.Theme.Basic
  • Volo.Abp.AspNetCore.Components.WebAssembly.BasicTheme
  • Volo.Abp.AspNetCore.Components.Web.BasicTheme
  • Volo.Abp.AspNetCore.Components.Server.BasicTheme

add-package-ref

Adds one or more package reference to target project, also adds ABP module dependency. Both reference and target projects must belong to same module.

abp add-package-ref <package-names> [options]

Examples:

abp add-package-ref Acme.BookStore.Domain
abp add-package-ref "Acme.BookStore.Domain Acme.BookStore.Domain.Shared" -t Acme.BookStore.Web

Options

  • --target-project or -t: Name of the project that reference will be added. If not set, project in the current directory will be used.

install-module

Installs a module, that is published as nuget packages, to a local module. Project relations are created according the types of the projects. For Examples: a lib.domain-shared project is added to lib.domain-shared project

abp install-module <module-name> [options]

Examples:

abp install-module Volo.Blogging

abp install-module Volo.Blogging -t "modules/crm/Acme.Crm.abpmdl"

Options

  • --target-module or -t: Path (or folder path) of the target module that the other module will be installed to. If not set, the closest module to the current directory will be used.
  • --version or -v: Nuget version of the module to be installed.

install-local-module

Installs one module to another. Project relations are created according the types of the projects. For Examples: a lib.domain-shared project is added to lib.domain-shared project

abp install-local-module <module-path> [options]

Examples:

abp install-local-module Acme.OrderManagement

abp install-local-module Acme.OrderManagement -t "modules/crm/Acme.Crm.abpmdl"

Options

  • --target-module or -t: Path (or folder path) of the target module that the other module will be installed to. If not set, the closest module to the current directory will be used.

list-modules

Lists names of open-source application modules.

Usage:

abp list-modules [options]

Examples:

abp list-modules

list-templates

Lists all available templates to create a solution.

Usage:

abp list-templates

get-source

Downloads the source code of a module to your computer.

Usage:

abp get-source <module-name> [options]

Examples:

abp get-source Volo.Blogging

abp get-source Volo.Blogging --local-framework-ref --abp-path D:\GitHub\abp

Options

  • --output-folder or -o: Specifies the directory that source code will be downloaded in. If not specified, current directory is used.
  • --version or -v: Specifies the version of the source code that will be downloaded. If not specified, latest version is used.
  • --preview: If no version option is specified, this option specifies if latest preview version will be used instead of latest stable version.
  • --local-framework-ref --abp-path: Path of ABP GitHub repository in your computer. This will be used for converting project references to your local system. If this is not specified, project references will be converted to NuGet references.

add-source-code

Downloads the source code of a module and replaces package references with project references. This command only works if your ABP Commercial License has source-code access, or if source-code of the target module is free to all type of ABP Commercial Licenses.

abp add-source-code <module-name> [options]

Examples:

abp add-source-code Volo.Chat --add-to-solution-file

Options

  • --target-module or -t: The module that will refer the downloaded source code. If not set, the module in the current directory will be used.
  • --add-to-solution-file: Adds the downloaded source code to C# solution file and ABP Studio solution file.

init-solution

Creates necessary files for a solution to be readable by ABP Studio. If the solution is generated via ABP Studio, you don't need this command. But it is not generated by ABP Studio, you need this command to make it work with ABP Studio.

abp init-solution [options]

Examples:

abp init-solution --name Acme.BookStore

Options

  • --name or -n: Name for the solution. If not set, it will be the same as the name of closest c# solution in the file system.

kube-connect

Connects to Kubernetes cluster (Available for Business or higher licenses). Press ctrl+c to disconnect.

abp kube-connect [options]

Examples:

abp kube-connect

abp kube-connect -p Default.abpk8s.json

abp kube-connect -c docker-desktop -ns mycrm-local

Options

  • --profile or -p: Kubernetes Profile path or name to be used. Path can be relative (to current directory) or full path, or you can simply give the name of profile if you run this command in same directory with the solution or profile. This parameter is not needed if you use --namespace and --context parameters.
  • --namespace or -ns: The namespace that services running on.
  • --context or -c: The context that services running in.
  • --wireguard-password or -wp: Wireguard password for the profile. This is not needed if you already set it on the ABP Studio user interface.
  • --solution-path or -sp: Path of the solution. If not set, the closest solution in file system will be used.

kube-intercept

Intercepts a service running in Kubernetes environment (Available for Business or higher licenses). Press ctrl+c to stop interception.

abp kube-intercept <service-name> [options]

Examples:

abp kube-intercept mycrm-product-service -ns mycrm-local

abp kube-intercept mycrm-product-service -ns mycrm-local -a MyCrm.ProductService.HttpApi.Host.csproj

abp kube-intercept mycrm-product-service -ns mycrm-local -a MyCrm.ProductService.HttpApi.Host.csproj -pm 8080:80,8081:443

Options

  • --application or -a: Relative or full path of the project that will intercept the service. If not set, the project in the current directory will be used.
  • --namespace or -ns: The namespace that service running on.
  • --context or -sc: The context that service running in. Default value is docker-desktop.
  • --port-mappings or -pm: Port mappings for the service.

list-module-sources

With this command, you can see the list of remote module sources that you can use to install modules. It is similar to the NuGet feed list in Visual Studio.

abp list-module-sources

add-module-source

Adds a remote module source to the list of sources that you can use to install modules.

abp add-module-source [options]

You can create your own module source and add it to the list. It accepts a name and a url or a path as parameter. If you provide a path, it should be a local path that contains the modules json file. If you provide a url, it should be a url that contains the modules json file. The json file should be in the following format:

{
	"name": "ABP Open Source Modules",
	"modules" : {
		"Volo.Abp.Account": {},
		"Volo.Abp.AuditLogging": {},
		"Volo.Abp.Identity": {},
    ...
	}
}

When you add a module source, you can install modules from that source using the install-module command. It attempts to find the package from NuGet, such as Volo.Abp.Account.Installer. You can configure a private NuGet feed and publish your modules to that feed. Each module has an installer package that is utilized to install the module into a solution. When you publish your module to a private feed, you should also publish the installer package to the same feed.

Examples:

abp add-module-source -n "Custom Source" -p "D:\packages\abp\modules.json"

abp add-module-source -n "Custom Http Source" -p "https://raw.githubusercontent.com/x/abp-module-store/main/abp-module-store.json"

Options

  • --name or -n: The name of the module source.
  • --path or -p: The path of the module source. It can be a local path or a url.

delete-module-source

Deletes a remote module source from the list of sources that you can use to install modules.

abp delete-module-source [options]

Examples:

abp delete-module-source -n "Custom Source"

Options

  • --name or -n: The name of the module source.

generate-proxy

Generates Angular, C# or JavaScript service proxies for your HTTP APIs to make easy to consume your services from the client side. Your host (server) application must be up and running before running this command.

Usage:

abp generate-proxy -t <client-type> [options]

Examples:

abp generate-proxy -t ng -url https://localhost:44302/
abp generate-proxy -t js -url https://localhost:44302/
abp generate-proxy -t csharp -url https://localhost:44302/

Options

  • --type or -t: The name of client type. Available clients:

    • csharp: C#, work in the *.HttpApi.Client project directory. There are some additional options for this client:

      • --without-contracts: Avoid generating the application service interface, class, enum and dto types.
      • --folder: Folder name to place generated CSharp code in. Default value: ClientProxies.

    • ng: Angular. There are some additional options for this client:

      • --api-name or -a: The name of the API endpoint defined in the /src/environments/environment.ts. Default value: default.
      • --source or -s: Specifies the Angular project name to resolve the root namespace & API definition URL from. Default value: defaultProject.
      • --target: Specifies the Angular project name to place generated code in. Default value: defaultProject.
      • --module: Backend module name. Default value: app.
      • --entry-point: Targets the Angular project to place the generated code.
      • --url: Specifies api definition url. Default value is API Name's url in environment file.
      • --prompt or -p: Asks the options from the command line prompt (for the unspecified options).

    • js: JavaScript. work in the *.Web project directory. There are some additional options for this client:

      • --output or -o: JavaScript file path or folder to place generated code in.
  • --module or -m: Specifies the name of the backend module you wish to generate proxies for. Default value: app.
  • --working-directory or -wd: Execution directory. For csharp and js client types.
  • --url or -u: API definition URL from.
  • --service-type or -st: Specifies the service type to generate. application, integration and all, Default value: all for C#, application for JavaScript / Angular.

See the Angular Service Proxies document for more.

remove-proxy

Removes previously generated proxy code from the Angular, CSharp or JavaScript application. Your host (server) application must be up and running before running this command.

This can be especially useful when you generate proxies for multiple modules before and need to remove one of them later.

Usage:

abp remove-proxy -t <client-type> [options]

Examples:

abp remove-proxy -t ng
abp remove-proxy -t js -m identity -o Pages/Identity/client-proxies.js
abp remove-proxy -t csharp --folder MyProxies/InnerFolder

Options

  • --type or -t: The name of client type. Available clients:
    • csharp: C#, work in the *.HttpApi.Client project directory. There are some additional options for this client:
      • --folder: Folder name to place generated CSharp code in. Default value: ClientProxies.
    • ng: Angular. There are some additional options for this client:
      • --api-name or -a: The name of the API endpoint defined in the /src/environments/environment.ts. Default value: default.
      • --source or -s: Specifies the Angular project name to resolve the root namespace & API definition URL from. Default value: defaultProject.
      • --target: Specifies the Angular project name to place generated code in. Default value: defaultProject.
      • --url: Specifies api definition url. Default value is API Name's url in environment file.
      • --prompt or -p: Asks the options from the command line prompt (for the unspecified options).
    • js: JavaScript. work in the *.Web project directory. There are some additional options for this client:
      • --output or -o: JavaScript file path or folder to place generated code in.
  • --module or -m: Specifies the name of the backend module you wish to generate proxies for. Default value: app.
  • --working-directory or -wd: Execution directory. For csharp and js client types.
  • --url or -u: API definition URL from.

See the Angular Service Proxies document for more.

switch-to-preview

You can use this command to switch your solution or project to latest preview version of the ABP.

Usage:

abp switch-to-preview [options]

Options

  • --directory or -d: Specifies the directory. The solution or project should be in that directory or in any of its sub directories. If not specified, default is the current directory.

switch-to-nightly

You can use this command to switch your solution or project to latest nightly preview version of the ABP packages.

Usage:

abp switch-to-nightly [options]

Options

  • --directory or -d: Specifies the directory. The solution or project should be in that directory or in any of its sub directories. If not specified, default is the current directory.

switch-to-stable

If you're using the ABP preview packages (including nightly previews), you can switch back to latest stable version using this command.

Usage:

abp switch-to-stable [options]

Options

  • --directory or -d: Specifies the directory. The solution or project should be in that directory or in any of its sub directories. If not specified, default is the current directory.

switch-to-local

Changes all NuGet package references to local project references for all the .csproj files in the specified folder (and all its subfolders with any deep). It is not limited to ABP or Module packages.

Usage:

abp switch-to-local [options]

Options

  • --solution or -s: Specifies the solution directory. The solution should be in that directory or in any of its sub directories. If not specified, default is the current directory.

  • --paths or -p: Specifies the local paths that the projects are inside. You can use | character to separate the paths.

Examples:

abp switch-to-local --paths "D:\Github\abp|D:\Github\my-repo"

upgrade

Upgrades the ABP modules to pro modules, such as upgrading Identity to Identity Pro. You can use this for Single Layer Web Application and Layered Web Application templates. This command is specially designed for users who already started their development before having a license. Therefore this command requires license.

Usage:

abp upgrade [-t <template-name>] [options]

Examples:

abp upgrade -t app
abp upgrade -t app --language-management --gdpr --audit-logging-ui --text-template-management --openiddict-pro
abp upgrade -t app-nolayers --audit-logging-ui
abp upgrade -t app-nolayers -p D:\MyProjects\MyProject

Options

  • --path or -p: Specifies the module path. The module should be in that directory. If not specified, the default is the current directory.
  • --gdpr: Installs GDPR module too.
  • --language-management: Installs Language Management module too.
  • --audit-logging-ui: Installs Audit Logging Pro (UI) module too.
  • --text-template-management: Installs Text Template Management module too.
  • --openiddict-pro: Installs OpenIddict Pro (UI) module too.

translate

Simplifies to translate localization files when you have multiple JSON localization files in a source control repository.

  • This command will create a unified json file based on the reference culture.
  • It searches all the localization JSON files in the current directory and all subdirectories (recursively). Then creates a single file (named abp-translation.json by default) that includes all the entries need to be translated.
  • Once you translate the entries in this file, you can then apply your changes to the original localization files using the --apply command.

The main purpose of this command is to translate ABP localization files (since the abp repository has tens of localization files to be translated in different directories).

Creating the Translation File

First step is to create the unified translation file:

abp translate -c <culture> [options]

Examples:

abp translate -c de

This command created the unified translation file for the de (German) culture.

Additional Options
  • --reference-culture or -r: Default en. Specifies the reference culture.
  • --output or -o: Output file name. Default abp-translation.json.
  • --all-values or -all: Include all keys to translate. By default, the unified translation file only includes the missing texts for the target culture. Specify this parameter if you may need to revise the values already translated before.

Applying Changes

Once you translate the entries in the unified translation file, you can apply your changes to the original localization files using the --apply parameter:

abp translate --apply  # apply all changes
abp translate -a       # shortcut for --apply

Then review changes on your source control system to be sure that it has changed the proper files and send a Pull Request if you've translated ABP resources. Thank you in advance for your contribution.

Additional Options
  • --file or -f: Default: abp-translation.json. The translation file (use only if you've used the --output option before).

Online DeepL translate

The translate command also supports online translation. You need to provide your DeepL Authentication Key.

It will search all the en.json(reference-culture) files in the directory and sub-directory and then translate and generate the corresponding zh-Hans.json(culture) files.

abp translate -c zh-Hans --online --deepl-auth-key <auth-key>

login

Some features of the CLI requires to be logged in to ABP Platform. To login with your username write:

abp login <username>                                  # Allows you to enter your password hidden
abp login <username> -p <password>                    # Specify the password as a parameter (password is visible)
abp login <username> --organization <organization>    # If you have multiple organizations, you need set your active organization
abp login <username> -p <password> -o <organization>  # You can enter both your password and organization in the same command
abp login <username> --device                         # Use device login flow

When using the -p parameter, be careful as your password will be visible. It's useful for CI/CD automation pipelines.

A new login with an already active session overwrites the previous session.

login-info

Shows your login information such as Name, Surname, Username, Email Address and Organization.

abp login-info

logout

Logs you out by removing the session token from your computer.

abp logout

bundle

This command generates script and style references for ABP Blazor WebAssembly and MAUI Blazor project and updates the index.html file. It helps developers to manage dependencies required by ABP modules easily. In order bundle command to work, its executing directory or passed --working-directory parameter's directory must contain a Blazor or MAUI Blazor project file(*.csproj).

Usage:

abp bundle [options]

Options

  • --working-directory or -wd: Specifies the working directory. This option is useful when executing directory doesn't contain a Blazor project file.
  • --force or -f: Forces to build project before generating references.
  • --project-type or -t: Specifies the project type. Default type is webassembly. Available types:
    • webassembly
    • maui-blazor
  • --version or -v: Specifies the ABP Framework version that the project is using. This is helpful for those who use central package management.

bundle command reads the appsettings.json file inside the Blazor and MAUI Blazor project for bundling options. For more details about managing style and script references in Blazor or MAUI Blazor apps, see Managing Global Scripts & Styles

install-libs

This command install NPM Packages for MVC / Razor Pages and Blazor Server UI types. Its executing directory or passed --working-directory parameter's directory must contain a project file(*.csproj).

install-libs command reads the abp.resourcemapping.js file to manage package. For more details see Client Side Package Management.

Usage:

abp install-libs [options]

Options

  • --working-directory or -wd: Specifies the working directory. This option is useful when executing directory doesn't contain a project file.

check-extensions

This command checks the installed ABP CLI extensions and updates them if necessary.

Usage:

abp check-extensions

install-old-cli

This command installs the old ABP CLI with a specific version if it's specified. Otherwise, it installs the old ABP CLI with the latest stable version. Then, you can directly use the old ABP CLI by simply passing the --old parameter at the end of the command or using the abp-old as the executing command.

Usage:

abp install-old-cli [options]

generate-razor-page

generate-razor-page command to generate a page class and then use it in the ASP NET Core pipeline to return an HTML page.

Usage:

  1. Create a new Razor Page(MyPage.cshtml) that inherits from AbpCompilationRazorPageBase in Views folder.
  2. Create a MyPageModel class in the same folder.
  3. Create a MyPage.js and MyPage.css files in the same folder.
  4. Add the following code to the MyPage.cshtml, MyPage.css and MyPage.js files.
public class MyPageModel
{
    public string Message { get; set; }

    public MyPageModel(string message)
    {
        Message = message;
    }
}

@using System.Globalization
@using Volo.Abp.AspNetCore.RazorViews
@inherits AbpCompilationRazorPageBase
@{
    Response.ContentType = "text/html; charset=utf-8";
    Response.StatusCode = 200;
}

@functions{
    public MyPage(MyPageModel model)
    {
        Model = model;
    }

    public MyPageModel Model { get; set; }
}

<html lang="@HtmlEncoder.Encode(CultureInfo.CurrentCulture.Name)">
    <head>
        <meta charset="utf-8" />
        <style>
            <%$ include: MyPage.css %>
        </style>
        <title>@HtmlEncoder.Encode(Model.Message)</title>
    </head>
    <body>
        <h3>@HtmlEncoder.Encode(Model.Message)</h3>

        <ul class="list-group">
            @for(int i = 0; i < 10; i++)
            {
                <li class="list-group-item">@i item</li>
            }
        </ul>

        <script>
            //<!--
            <%$ include: MyPage.js %>
            //-->
        </script>
    </body>
</html>

body {
    background-color: #65b2ff;
    color: #495057;
    font-family: 'Segoe UI', Tahoma, Geneva, Verdana, sans-serif;
}

console.log('MyPage.js loaded!');
  1. Finally, run the generate-razor-page command under the Views folder:
> abp generate-razor-page

Generating code files for pages in /MyProject/Views
  Generating code file for page MyPage.cshtml ...
    Inlining file MyPage.css
    Inlining file MyPage.js
    Done!
1 files successfully generated.

The output will be like in the above command output, and MyPage.Designer.cs file will be created in the same folder. It's a standard C# class that you can use it in the pipeline to return an HTML page:

app.Use(async (httpContext, next) =>
{
    if (true) // Your condition
    {
        var page = new MyPage(new MyPageModel("Test message"));
        await page.ExecuteAsync(httpContext);
    }
    else
    {
        await next();
    }
});

Razor Page

Options

  • --version or -v: Specifies the version for ABP CLI to be installed.

See Also

Was this page helpful?

Please make a selection.

To help us improve, please share your reason for the negative feedback in the field below.

Please enter a note.

Thank you for your valuable feedback!

Please note that although we cannot respond to feedback, our team will use your comments to improve the experience.

In this document
Community Talks

What’s New with .NET 9 & ABP 9?

21 Nov, 17:00
Online
Register Now
Mastering ABP Framework Book
Mastering ABP Framework

This book will help you gain a complete understanding of the framework and modern web application development techniques.

Learn More